- Securely clamp the countershaft assembly in a bench vice with wood blocks.
- Use a chisel (A) to raise the locknut tab (B) from the groove in the countershaft.
- Remove the locknut (A) and the spring washer (B).
![](13-32b25.png)
| ![](line1.png) |
- Support 5th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the ball bearing (F).
- Support 4th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of 4th gear.
![](13-32d25.png)
|