Install new set rings (A) on the left and right driveshafts (B). Install the right and left driveshafts (see page 16-18). While installing the driveshafts in the differential, be sure not to allow dust or other foreign particles to enter the transmission. NOTE: Clean the areas where the driveshafts contact the transmission (differential) with solvent or carburettor cleaner and dry with compressed air. Turn the right and left steering knuckle fully outward and slide the driveshafts into the differential until you feel its set ring engage the side gear. Support the sub-frame (A) with a 4 x 4 x 40 in. piece of wood (B) and lift it up to the body.

Loosely install the 4 sub-frame mounting bolts (A) and the 10 x 1.25 mm bolts (B). Align the reference marks (A) with the centre of the bolt heads (B), then tighten the bolts to the specified torque.