Set the park lever in the position. Measure the distance (A) between the park pawl shaft (B) and the park lever roller pin (C). STANDARD: 72.9-73.9 mm (2.87-2.91 in.)

If the measurement is out of tolerance, select and install the appropriate park lever stop (A) from the table below. PARK LEVER STOP Mark Part Number L1 L2 1 24537-PA9-003 11.00 mm (0.433 in.) 11.00 mm (0.433 in.) 2 24538-PA9-003 10.80 mm (0.425 in.) 10.65 mm (0.419 in.) 3 24539-PA9-003 10.60 mm (0.417 in.) 10.30 mm (0.406 in.) After replacing the park lever stop, make sure the distance is within tolerance.