NOTE:
- Record all freeze data before you troubleshoot.
- The illustration shows the example of connector terminal arrangement; connector terminal arrangement varies with the models.
- Disconnect A/T clutch pressure control solenoid valve A connector (2P).
- Measure A/T clutch pressure control solenoid valve A resistance at the solenoid valve connector.
A/T CLUTCH PRESSURE CONTROL SOLENOID VALVE A CONNECTOR
Terminal side of male terminals
Is the resistance about 5 ohm?
YES - Go to step 3.
NO - Replace the A/T clutch pressure control solenoid valves A and B. 
- Disconnect PCM connectors B (24P) and C (22P).
- Check for continuity between PCM connector terminal B7 and body ground and between terminal C1 and body ground.
PCM CONNECTORS
Wire side of female terminals
Is there continuity?
YES - Repair short to ground in the wires between PCM connector terminals B7 and C1 and the A/T clutch pressure control solenoid valve A.
NO - Go to step 5.
- Connect A/T clutch pressure control solenoid valve A connector.
- Measure the resistance between PCM connector terminals B7 and C1.
PCM CONNECTORS
Wire side of female terminals
Is the resistance about 5 ohm?
YES - Go to step 7.
NO - Repair loose terminal or open in the wires between PCM connector terminals B7 and C1 and the A/T clutch pressure control solenoid valve A.
