Special Tools Required Cylinder end seal remover attachment, 07NAD-SR30200 Driver, 27 mm, 07ZAF-S5A0100 Valve seal ring sizing tool, 07NAG-SR30900 Sleeve seal ring guide, 07YAG-S2X0100 Sleeve seal ring sizing tool, 07ZAG-SA50100 Attachment, 32 x 35 mm, 07746-0010100 Driver, 07749-0010000 Piston seal ring guide, 07GAG-SD40100 Piston seal ring sizing tool, 07GAG-SD40200 Pincers, Oetiker 1098 or equivalent, commercially available. Pilot collar, 07GAF-PH70100 Locknut wrench, 07ZAA-S5A0100 Driver handle, 07NAD-SR30101 Seal slider, 07974-6890801 Valve seal ring guide, 07ZAG-S5A0200 NOTE: Refer to the Exploded View as needed during this procedure. Removal Remove the steering gearbox (see page 17-35). Disassembly Unbend the lock washer (A).

Hold the bracket (A) with one wrench, and unscrew both rack ends (B) with another wrench. Remove the lock washers. Remove cylinder lines (A) from the gearbox. Drain the fluid from the cylinder fittings by slowly moving the steering rack back and forth.