- SELF-LOCKING NUT
12 x 1.25 mm, 44 Nm (4.5kgf/m, 33 lbf/ft), Replace.
- UPPER SPRING SEAT
- UPPER SPRING MOUNTAIN CUSHION
NOTE: Do not remove the cushion from the spring. Replace it with a new one if it was removed from the spring.
Set the new cushion on the spring with the projection of the cushion and the upper end of the spring in the position shown. The cushion has the six claws. Secure the cushion against the spring by bending the three claws (marked with
) out of six securely. - BUMP STOP
Check for weakness and damage.
- DAMPER UNIT
Check for oil leak, gas leak and smooth operation.
- DAMPER SPRING
Check for free length.
- UPPER SPRING MOUNTING CUSHION
Check for deterioration and damage.
- DAMPER MOUNTING BEARING
Check for smooth operation.
- DAMPER MOUNTING BASE
Check for deformation.
