DTC 31, 32, 33, 34, 35, 36, 37, 38: Solenoid Clear the DTC (see page 19-90). Turn the ignition switch ON (II). Verify the DTC. Does the ABS indicator come on and are DTCs 31, 32, 33, 34, 35, 36, 37, 38 indicated? YES - Check for loose terminals in the ABS control unit 25P connector. If necessary, substitute a known-good ABS modulator-control unit and recheck. NO - The system is OK at this time.

DTC 41, 42, 43, 44: Wheel Lock Check for brake drag. Do the brakes drag? YES - Repair the brake drag. NO - Go to step 2. Check the installation of the appropriate wheel sensor (see table). DTC Appropriate Terminal 41 Right-front 42 Left-front 43 Right-rear 44 Left-rear Is it correct? YES - The probable cause was the vehicle spun during cornering. If the problem recurs, check the modulator using the Honda PGM Tester. NO - Reinstall the wheel sensor correctly.