ABS Components

ABS Indicator Circuit Troubleshooting (cont'd)

19-77  

  1. Disconnect the gauge assembly connector B (22P) and go to step 10 for 4-door model. Disconnect the gauge assembly connector A (22P), and go to step 12 for 5-door model.
  1. Check for continuity between the gauge assembly connector B (22P) terminal No. 15 and body ground.

GAUGE ASSEMBLY CONNECTOR B (22P)

Wire side of female terminals

Is there continuity?

YES - Repair short to body ground in the wire between the gauge assembly and the ABS control unit.

NO - Go to step 11.

  1. Check for continuity between the gauge assembly connector B (22P) terminal No. 18 and body ground.

GAUGE ASSEMBLY CONNECTOR B (22P)

Wire side of female terminals

Is there continuity?

YES - Check for loose terminals in the gauge assembly connectors. If the connectors are OK, replace the printed circuit board in the gauge assembly.

NO - Repair open in the wire between the gauge assembly and body ground (G501).

  1. Check for continuity between the gauge assembly connector A (22P) terminal No. 12 and body ground.

GAUGE ASSEMBLY CONNECTOR A (22P)

Wire side of female terminals

Is there continuity?

YES - Repair short to body ground in the wire between the gauge assembly and the ABS control unit.

NO - Go to step 13.

  1. Check for continuity between the gauge assembly connector B (22P) terminal No. 12 and body ground.

GAUGE ASSEMBLY CONNECTOR B (22P)

Wire side of female terminals

Is there continuity?

YES - Check for loose terminals in the gauge assembly connectors. If the connectors are OK, replace the gauge assembly.

NO - Repair open in the wire between the gauge assembly and body ground (G501).