If equipped with a headrest, pull out the seat-back frame (A) from the pad (B), then pull out the headrest guides (C) while pinching the end of the guides, and remove them. The left seat-back is shown, the right seat-back is similar. Remove the seat-back cover and pad from the seat-back frame.

Pull back the edge of the seat-back cover (A) all the way around, and release the hooks (B) of the horizontal wires (C) from the vertical wires (D) on the pad, and on the left seat-back, remove the clips (E), then remove the seat-back cover. Left seat-back: Right seat-back: Install the cover in the reverse order of removal, and note these items: To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks and clips. Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.