Openers

Hood Opener Cable Replacement

20-125  

NOTE:

  1. Remove these items:
  1. Disconnect the hood opener cable (A) from the hood latch (B) (see page 20-128), and remove the bolts (C), then remove the hood release handle (D) from the body (LHD is shown, RHD is symmetrical).
    Fastener Locations
    C : Bolt, 2 E : Clip LHD, 4
        RHD, 5

  1. Using a clip remover, detach the clips (E), and remove the grommet (F) from the body, then remove the hood opener cable from the vehicle. Take care not to bend the cable.
  2. Install the cable in the reverse order of removal, and replace any damaged clips.