NOTE: Put on gloves to protect your hands. Take care not to scratch the door. Remove the power mirror/manual mirror (see page 20-33). Starting at the rear, pry the door glass outer weatherstrip (A) up to detach the clips (B, C), then remove the weatherstrip. Fastener Locations B : Clip, 4 C : Clip, 1 Install the weatherstrip in the reverse order of removal, and replace any damaged clips.

NOTE: Take care not to scratch the door. Use a clip remover to remove the clips. At the front pillar, remove the door stop mounting bolt (A). Fastener Locations A : Bolt, 1 B : Clip, 1 C: Clip, 17 Detach the clips (B, C), then remove the door weatherstrip (D). Install the weatherstrip in the reverse order of removal and note these items: Replace any damaged clips. Make sure the weatherstrip is installed in the holder (D) securely. Apply liquid thread lock to door stop mounting bolt before installation. Check for water leaks (see step 7 on page 20-25).