Set the windshield in the opening and centre it. Make alignment marks (A) across the windshield and body with a grease pencil at the four points shown. Be careful not to touch the windshield where adhesive will be applied. Remove the windshield.

With a sponge, apply a light coat of glass primer around the edge of the windshield (A) between the dams (B) and moulding (C) as shown, then lightly wipe it off with gauze or cheesecloth: Apply glass primer to the moulding. Do not apply body primer to the windshield, and do not get body and glass primer sponges mixed up. Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the windshield properly, causing a leak after the windshield is installed. Keep water, dust and abrasive materials away from the primed surface. Hatched area: Apply glass primer here.