With the sunroof wrench, close the glass (A) fully:
Make sure both link lifters (B) are parallel, and in the position shown.
Check the glass fit to the roof panel and the glass height (see page 20-194).
With an open-end wrench, loosen the position switch mounting bolts (C).
Adjust the position switch (D):
Move the switch plate (E) a little at a time, then secure it at the position where you hear a faint click when the switch cam (F) pushes the position switch (open/close).
Check that the switch plate contacts the switch bracket (F).
Check the operation of the glass (from the tilt-up position to fully closed position, from the fully open position to the fully closed position) by operating the sunroof switch.
