NOTE:

• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• Take care not to bend or scratch the trim and panels.

Remove the trim as shown.

Install the trim in the reverse order of removal and note these items:

• Replace any damaged clips.
• When installing the trunk side upper trim, slip the rear seat belt through the hole in the trim.
• Before installing the anchor bolt, make sure there are no twists or kinks in the belt.

  Fastener Locations
  A : Clip, 7	B : Clip, 3 (White)	C : Clip, 1	D : Clip, 2
  					QUARTER PILLAR TRIM TRUNK SIDE TRIM PANEL REAR CENTRE SHELF TRUNK SIDE UPPER TRIM TRUNK SIDE UPPER TRIM BELT HOLE CAP REAR SEAT BELT REAR SEAT BELT LOWER ANCHOR BOLT, 7/16-20 UNF, 32 Nm (3.3 kgf m, 24 lbf ft) REAR DOOR SILL TRIM SEAT SIDE TRIM REAR DOOR OPENING TRIM