Dashboard

Steering Hanger Beam Replacement

20-226  

NOTE: Put on gloves to protect your hands.
  1. Remove the dashboard (see page 20-223).
  2. Remove the these items from the dashboard:
  • Instrument panel (see page 20-215)
  • Driver's pocket (see page 20-216)
  • Gauge assembly (see page 22-93)
  • Centre panel, auto A/C (see page 20-219)
  • Sunlight sensor, auto A/C (see page 21-152)
  • Passenger's airbag (see page 23-167)
  1. Remove the screws, then remove the glove box striker (A). If equipped, disconnect the glove box light connector (B).
    Fastener Locations
    : Screw, 4

  1. Loosen the bolts (A) and remove the bolt (B) and pull down the under-dash fuse/relay box (C) to release the bracket (D).

Fastener Locations
A : Bolt, 2 B : Bolt, 1

  1. Remove the sunlight sensor wire harness (A) by removing the cushion tape (B).