Interior Trim

Headliner Removal/Installation

20-68  

NOTE:

  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  • Take care not to bend and scratch the headliner.
  • Be careful not to damage the dashboard and other interior trim.
  1. Remove these items:
  • Front pillar trim, both sides (see page 20-64)
  • Centre pillar upper trim, both sides (see page 20-64)
  • Rear-view mirror (see page 20-36)
  • Ceiling light/spotlights, with sunroof (see page 22-137)
  • Spotlights, without sunroof (see page 22-138)
  • Ceiling light (see page 22-138)
  1. From both sides, remove the caps (A), and remove the self-tapping ET screws, then remove the sunvisor (B) and holder (C).
    Fastener Locations
    : Screw, 4

  1. Lower the grab handle, then remove the caps (A). Remove the self-tapping ET screws, then remove the grab handle (B). Remove the remaining grab handles.

    Fastener Locations
    : Screw, 6