For some models: SRS components are located in this area. Review the SRS component locations (see page 23-23), and the precautions and procedures (see page 23-25) in the SRS section before performing repairs or service. NOTE When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage. Take care not to scratch the body or tear the seat covers. Put on gloves to protect your hands. If equipped, make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons. If equipped with a side airbag, disconnect the negative battery cable, and wait at least 3 minutes before beginning work. Remove the seat track end covers (A) from the back of both seat tracks. Outer: Inner:

Remove the bolts (A) securing the front seat (B). Fastener Locations A: Bolt, 4