4-door DTC 2: A Short in the In-car Temperature Sensor Circuit Remove the in-car temperature sensor (see page 21-149). Test the in-car temperature sensor (see page 21-150). Is the resistance within the specifications shown on the graph? YES - Go to step 3. NO - Replace the in-car temperature sensor. Disconnect climate control unit connector B (22P). Check for continuity between the No. 9 terminal of climate control unit connector B (22P) and body ground. CLIMATE CONTROL UNIT CONNECTOR B (22P) Wire side of female terminals Is there continuity? YES - Repair short to body ground in the wire between the climate control unit and the in-car temperature sensor. NO - Substitute a known-good climate control unit and recheck. If the symptom/indication goes away, replace the original climate control unit.

4-door DTC 3: An Open in the Outside Air Temperature Sensor Circuit Remove the outside air temperature sensor (see page 21-150). Measure the resistance between the No. 1 and No. 2 terminals of the outside air temperature sensor. *Dip the sensor in ice water and measure resistance. Then pour hot water on the sensor and check for change in resistance. OUTSIDE AIR TEMPERATURE SENSOR *Is the resistance within the specifications shown on the graph? YES - Go to step 3. NO - Replace the outside air temperature sensor. Disconnect climate control unit connector B (22P).