Check the No. 1 (20A) fuse in the under-hood fuse/relay box and the No. 14 (10A) fuse in the under-dash fuse/relay box. Are the fuses OK? YES - Go to step 2. NO - Replace the fuse(s) and recheck. Remove the condenser fan relay from the under-hood fuse/relay box and test it (see page 22-80). Is the relay OK? YES - Go to step 3. NO - Replace the condenser fan relay. Measure the voltage between the No. 2 terminal of the condenser fan relay 4P socket and body ground. CONDENSER FAN RELAY 4P SOCKET Is there battery voltage? YES - Go to step 4. NO - Replace the under-hood fuse/relay box.

Connect the No. 1 and No. 2 terminals of the condenser fan relay 4P socket with a jumper wire. CONDENSER FAN RELAY 4P SOCKET Does the condenser fan run? YES - Go to step 5. NO - Go to step 8. Disconnect the jumper wire. Turn the ignition switch ON (II). Measure the voltage between the No. 3 terminal of the condenser fan relay 4P socket and body ground. CONDENSER FAN RELAY 4P SOCKET Is there battery voltage? YES - Replace the under-hood fuse/relay box. NO - Repair open in the wire between the No. 14 fuse in the under-dash fuse/relay box and the condenser fan relay. Disconnect the jumper wire.