- Open the hood. Remove the nut covers, nuts (A) and the windshield wiper arms (B).
- Remove the hood seals (C) and cowl covers (D).
- Disconnect the 5P connector (A) from the wiper motor.
- Remove the three bolts (B) and wiper linkage assembly (C).
- Scribe a line (A) across the link and windshield wiper linkage to show the original adjustment.
Separate the windshield wiper linkage (B) from the wiper motor (C).
- Install in the reverse order of removal and note these items:
- Grease the moving parts.
- Before reinstalling the wiper arms, turn the wiper switch ON, then OFF to return the wiper shafts to the park position.
- If necessary, replace any damaged clips.
- Check the wiper motor operation.
