Security System

Hood Switch Test

 22-266 Security Horn Test

  1. Open the hood.
  2. Disconnect the 2P connector from the hood switch.

Terminal side of male terminals

  1. Check for continuity between the terminals.
  • There should be continuity between the No. 1 and No. 2 terminals when the hood is opened.
    (lever released)
  • There should be no continuity between the No. 1 and No. 2 terminals when the hood closed.
    (lever pushed down)

  1. Remove the front bumper (see page 20-105).
  2. Disconnect the 1P connector from the horn.

4-door:

5-door:

  1. Test the horn by connecting battery power to the terminal (A) and grounding the body ground (B).
    The horn should sound.
  2. If the horn fails to sound, check for.
  • faulty security horn relay.
  • faulty mounting bolt.