- If equipped with a side airbag, disconnect the negative battery cable and wait at least 3 minutes before beginning work.
- Remove the front seat (see page 20-229).
- Remove the centre cover from the seat, driver's seat (see page 20-231), passenger's seat (see page 20-232).
- Detach the seat belt switch connector clip (A) and harness clip (B).
Driver's seat:
Passenger's seat:
- On the driver's seat, adjust the seat cushion to its maximum height.
- Remove the centre anchor bolt (A) and remove the seat belt buckle (B).
- Pull the seat belt switch harness (C) out through the space between the seat cushion and the seat linkage (driver's seat), or the hole on the seat track (passenger's seat).
- Install the buckle in the reverse order of removal and note these items:
- Assemble the washers on the centre anchor bolt as shown.
- If equipped with a side airbag, reconnect the negative cable to the battery.
- CENTRE ANCHOR BOLT
- TOOTHED LOCK WASHER
- SPRING WASHER
- COLLAR
- CENTRE ANCHOR
