Including the most recent problem, up to three different malfunctions can be indicated (see example 1 below).
In case of a continuous failure, the DTC will be indicated repeatedly (see example 1 below).
In case of an intermittent failure, the SRS indicator light will indicate the DTC one time, then it will stay on (see example 2 below).
If both a continuous and an intermittent failure occur, both DTCs will be indicated as continuous failures.
When the system is normal (no DTC), the SRS indicator light will stay on (see example 3).
If the SRS indicator light comes on continuously without a DTC, there may be a problem with the system.
If the SRS indicator light does not come on as indicated above, always check for an open or a short to ground in the SCS circuit before troubleshooting the system.