Cylinder Head

Cylinder Head Removal (cont'd)

 6-31  

  1. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
  • Idle air control (IAC) valve connector
  • Throttle position sensor connector
  • Manifold absolute pressure (MAP) sensor connector
  • Evaporative emission (EVAP) canister purge valve connector (Except KT, KW models)
  • Engine coolant temperature (ECT) sensor connector
  • Radiator fan switch connector
  • CKP sensor connector
  • TDC sensor connector
  • Exhaust gas recirculation (EGR) connector (D14Z5, D15Y4, D16W7, D17A2 engines)
  • VTEC solenoid valve connector (D15Y4, D16V2, D16W7, D17A2, D17A5, D17Z3 engines)
  • VTEC oil pressure switch connector (D16W7 engine)
  • Oil pressure sensor connector
  1. Support the engine with a jack and wood block under the oil pan.
  2. Remove the upper bracket.
  1. Remove the cover (A), then remove the exhaust manifold (B).

D15Y5, D15Y6, D17A1, D17Z1, D17Z2 engines:

Except D15Y5, D15Y6, D17A1, D17Z1, D17Z2 engines: