- Relieve the fuel pressure (see page 11-430).
- Remove the fuel fill cap.
- Remove the rear seat cushion (see page 20-237).
- Remove the access panel (A) from the floor.
- Disconnect the fuel pump 5P connector (B).
- Disconnect the quick-connect fittings from the fuel pump.
- Using the tool, loosen the fuel tank unit locknut (A).
- Measure the resistance between the No. 1 and No. 2 terminals with the float at E (EMPTY), 1/2 (HALF FULL), and F (FULL) positions.
If you do not get the following readings, replace the fuel gauge sending unit (see page 11-439).
Float Position |
F |
1/2 |
LOW |
E |
Resistance (ohms) |
11-13 |
68.5-74.5 |
113.4-128 |
130-132 |
