- If the clearance is more than the standard, select a new shim from the following table. If the clearance measured in step 5 is within the standard, go to step 9.
Turkey-produced D14Z6 engine transmission:
72 mm Shim
| Part Number | Thickness | |
| A | 41441-PL3-A001 | 1.0 mm (0.0394 in.) |
| B | 41442-PL3-A001 | 1.1 mm (0.0433 in.) |
| C | 41443-PL3-A001 | 1.2 mm (0.0472 in.) |
| D | 41444-PL3-A001 | 1.3 mm (0.0512 in.) |
| E | 41445-PL3-A001 | 1.4 mm (0.0551 in.) |
| F | 41446-PL3-A001 | 1.5 mm (0.0591 in.) |
| G | 41447-PL3-A001 | 1.6 mm (0.0630 in.) |
| H | 41448-PL3-A001 | 1.7 mm (0.0669 in.) |
| J | 41449-PL3-A001 | 1.8 mm (0.0709 in.) |
| K | 41450-PL3-A001 | 1.05 mm (0.0413 in.) |
| L | 41451-PL3-A001 | 1.15 mm (0.0453 in.) |
| M | 41452-PL3-A001 | 1.25 mm (0.0492 in.) |
| N | 41453-PL3-A001 | 1.35 mm (0.0531 in.) |
| P | 41454-PL3-A001 | 1.45 mm (0.0571 in.) |
| Q | 41455-PL3-A001 | 1.55 mm (0.0610 in.) |
| R | 41456-PL3-A001 | 1.65 mm (0.0650 in.) |
| S | 41457-PL3-A001 | 1.75 mm (0.0689 in.) |
Except Turkey-produced D14Z6 engine transmission:
80 mm Shim
| Part Number | Thickness | |
| A | 41441-PL3-B001 | 1.0 mm (0.0394 in.) |
| B | 41442-PL3-B001 | 1.1 mm (0.0433 in.) |
| C | 41443-PL3-B001 | 1.2 mm (0.0472 in.) |
| D | 41444-PL3-B001 | 1.3 mm (0.0512 in.) |
| E | 41445-PL3-B001 | 1.4 mm (0.0551 in.) |
| F | 41446-PL3-B001 | 1.5 mm (0.0591 in.) |
| G | 41447-PL3-B001 | 1.6 mm (0.0630 in.) |
| H | 41448-PL3-B001 | 1.7 mm (0.0669 in.) |
| J | 41449-PL3-B001 | 1.8 mm (0.0709 in.) |
| K | 41450-PL3-B001 | 1.05 mm (0.0413 in.) |
| L | 41451-PL3-B001 | 1.15 mm (0.0453 in.) |
| M | 41452-PL3-B001 | 1.25 mm (0.0492 in.) |
| N | 41453-PL3-B001 | 1.35 mm (0.0531 in.) |
| P | 41454-PL3-B001 | 1.45 mm (0.0571 in.) |
| Q | 41455-PL3-B001 | 1.55 mm (0.0610 in.) |
| R | 41456-PL3-B001 | 1.65 mm (0.0650 in.) |
| S | 41457-PL3-B001 | 1.75 mm (0.0689 in.) |
- Remove the bolts and transmission housing.
- Replace the thrust shim selected in step 7, then recheck the clearance.
- Reinstall the transmission.
