Driver 40 mm I.D., 07746-0030100
- Install the 80 mm set ring (A) in the transmission housing (B).
- Install the differential assembly (A) in the transmission housing (B) using the special tool.
- Install the three dowel pins (A) and the gasket (B) on the transmission housing (C).
- Place the flywheel housing (D) on the transmission housing.
- Install the housing bolts (20 bolts) and tighten the bolts in two or more steps to 29 Nm (3.0 kgf/m, 22 lbf/ft) in a criss-cross pattern.
