Honda Multi Matic Transmission/CVT Differential

Carrier Bearing Side Clearance Inspection (cont'd)

14-391  

  1. Measure the clearance between the 80 mm set ring and carrier bearing outer race with a feeler gauge.

STANDARD: 0-0.15 mm (0-0.006 in.)

  1. If the clearance is out of standard, remove the 80 mm set ring and measure its thickness.
  2. Select and install a new set ring, then recheck the clearance and make sure it is within the standard.

    SET RING, 80 mm

    No. Part Number Thickness
    1 90414-689-000 2.50 mm (0.098 in.)
    2 90415-689-000 2.60 mm (0.102 in.)
    3 90416-689-000 2.70 mm (0.106 in.)
    4 90417-689-000 2.80 mm (0.110 in.)
    5 90418-689-000 2.90 mm (0.114 in.)
    6 90419-PH8-000 3.00 mm (0.118 in.)