NOTE: Take care not to scratch the door. Use a clip remover to remove the clips. At the centre pillar, remove the door stop mounting bolt (A). Fastener Locations A : Bolt, 1 B : Clip, 14 Detach the clip (B), then remove the door weatherstrip (C). Install the weatherstrip in the reverse order of removal, and note these items: Replace any damaged clips. Make sure the weatherstrip is installed in the holder (D) securely. Apply liquid thread lock to the door stop mounting bolt before installation. Check for water leaks (see step 7 on page 20-25).

NOTE: Take care not to scratch the door. Use a clip remover to remove the clips. Remove the door sash trim (see page 20-22). Detach the door weatherstrip clip (A), then remove the door upper seal (B). Fastener Location A : Clip, 1 Install the seal in the reverse order of removal, and note these items: Replace the clip if it's damaged. Make sure the upper seal is installed in the holder (C) securely. Check for water leaks (see step 7 on page 20-25).