For Some Models With a Torx T40 bit, remove the door hook pin (A) from the door. With a Torx T40 bit, remove the bolts, then remove the door catch (A) from the body. Fastener Locations : Bolt, 2 Install the hook pin and catch in the reverse order of removal, and apply liquid thread lock to the threads of the door hook pin.

NOTE: Check the weatherstrips and glass run channel for damage or deterioration, and replace them if necessary. Place the vehicle on a firm, level surface. Remove these items: Door panel, front door (see page 20-7), rear door (see page 20-15) Plastic cover, front door (see page 20-3), rear door (see page 20-5) Carefully move the glass (A) until you can see the glass mounting bolts (B), then loosen them. Front: