Sunroof

Frame and Drain Tube Replacement

 20-57  

  1. Remove these items:
  1. Remove the bolts (A, B) and nuts (C), then remove the roof arch gussets (D) from both roof portions at the centre pillar. Put on gloves to protect your hands. Disconnect the motor connector (E), open/close-tilt/close switch connector (F), and the drain tubes (G), and remove the sunroof relays (H).
    Fastener Locations
    A : Bolt, 4 B : Bolt, 4 C : Nut, 4
L : Bolt, 10

  1. Remove the interior harness (I) by detaching the harness clips (J). Routing the interior harness for LHD is shown, RHD is symmetrical.
  2. With an assistant holding the frame (K), remove the bolts (L), starting at the rear, and release the rear hooks (M) by moving the frame forward, then remove the frame.
  3. With the help of an assistant, carefully remove the frame through the front door opening. Take care not to scratch the interior trim and body, or tear the seat covers.