- Remove the front seat (see page 20-87).
- Remove the recline cover and centre cover, with manual height (see page 20-89), without manual height (see page 20-90).
- With side airbag: From under the seat cushion, detach the side airbag connector clip, and on the passenger's seat, detach the OPDS unit connector clip. Release the hook springs.
- Release the hooks (A) from both sides the seat cushion.
- Release the seat-back cover (A) from the cushion frame spring (B), and release the hooks (C) from under the seat cushion.
- Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover.
- Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hooks.
- Replace any clips you removed with new ones (A). Install them with commercially available upholstery ring pliers (B).
