NOTE: LHD type is shown, RHD type is symmetrical.
- Remove the passenger's dashboard lower cover (see page 20-78), the right kick panel (see page 20-64) and the glove box (see page 20-79).
- Remove the bolt, then cut the plastic cross brace in the glove box opening with diagonal cutters in the area shown. Remove and discard the plastic cross brace.
- Remove the relays (A), then remove the bolts and the glove box frame (B).
- Remove the ECM/PCM (see page 11-3).
- Disconnect the connectors (A) from the blower motor, the power transistor and the recirculation control motor, then remove the wire harness clips (B).
- Fold the carpet and pad back toward you. Remove the mounting bolts, the mounting nut and the blower unit.
- Install the unit in the reverse order of removal. Make sure that there is no air leakage.
