Taillights (4-door): Remove the rear bumper (see page 20-105). Remove the trunk side trim panel (see page 20-67). Open the trunk lid and disconnect the connectors (A) from the taillight (B). Brake/Taillight: 21/5 W Turn Signal Light: 21 W Turn the bulb socket 45º counter-clockwise to remove the bulb socket. Remove the mounting nuts and bolts, then remove the taillight. When installing the taillight, check for the gasket; if it is distorted or stays compressed, replace it. After installing the taillight, run water over the taillight to make sure they do not leak.

Inner Taillights (4-door): Open the trunk lid and disconnect the connectors (A) from the inner taillight (B). Back-up Light: 21 W Inner Taillight: 5 W Turn the bulb socket 45º counter-clockwise to remove the bulb socket. Remove the mounting nuts, then remove the taillight. When installing the taillight, check for the gasket; if it is distorted or stays compressed, replace it. After installing the taillight, run water over the taillight to make sure they do not leak.