Taillights (5-door): Remove the rear bumper (see page 20-244). Open the tailgate and disconnect the connectors (A) from the taillight (B). Brake/Taillight: 21/5 W Turn Signal Light: 21 W Back-Up Light: 21 W Rear Fog Light: 21 W (KE model) Turn the bulb socket 45º counter-clockwise to remove the bulb socket. Remove the mounting nuts and bolts, then remove the taillight. When installing the taillight, check for the gasket; if it is distorted or stays compressed, replace it. After installing the taillight, run water over the taillight to make sure they do not leak.

NOTE: Be careful not to damage the fender. Push the retaining spring (A) and remove the side turn signal light (B). Side Turn Signal Light: 5W Disconnect the 2 P connector (C) from the light.