Reconnect the battery negative cable. Erase the DTC memory. Read the DTC. Is DTC 11-5 indicated? YES - Go to step 9. NO - Short to ground in the driver's side airbag inflator; replace the driver's side airbag. Disconnect the battery negative cable and wait for 3 minutes. Disconnect the SPi connector (A) from the front passenger's side airbag (B), and disconnect the special tool (2 ohm) from the SDi connector. Disconnect the U2o connector (A) from the SRS unit (B).

Check resistance between the No. 17 and No. 15 terminals of the U2o connector, and between the No. 17 and No. 16 terminals of the U2o connector. Then check resistance between the No. 17 terminal of the U2o connector and body ground. There should be 1 M ohm or more. U2o CONNECTOR Wire side of female terminals Is the resistance as specified? YES - Faulty SRS unit; replace the SRS unit. NO - Short to ground in the floor wire harness; replace the floor wire harness.