FINAL DRIVEN GEAR Replacement, page 14-388 CARRIER BEARING Replacement, page 14-388 DIFFERENTIAL CARRIER Backlash Inspection, page 14-387 Replacement, page 14-388 CARRIER BEARING Replacement, page 14-388 SET RING, 80 mm Selection, page 14-390

Place the differential assembly on V-blocks (A) and install both axles. Check the backlash of the pinion gears (B) with a dial indicator (C). STANDARD: 0.05-0.15 mm (0.002-0.006 in.) If the backlash is out of standard, replace the differential carrier.