Security System

Door Lock Knob Switch Test

 22-262  

Driver's door (4-door):
  1. Remove the driver's door panel (see page 20-7).
  2. Disconnect the 3P connector (A) from the actuator (B).

  1. Check for continuity between the terminals in each switch position according to the table.

 Passenger's door (4-door):
  1. Remove the passenger's door panel (see page 20-7).
  2. Disconnect the 3P connector (A) from the actuator.

  1. Check for continuity between the terminals in each switch position according to the table.

Front passenger's:

Left rear:

Right rear: